본문 바로가기 주메뉴 바로가기

우수연구성과

우수연구성과

Chung-Ang University Researchers Fabricate Novel Flexible Supercapacitors on Paper

관리자 2023-03-20 조회수 6,574

RESEARCH NEWS STORY

 

Chung-Ang University Researchers Fabricate Novel Flexible Supercapacitors on Paper

 

The researchers vertically integrate multiple gold electrodes within a single sheet of paper to create a super-dense energy storage device

 

Wearable devices are powered by flexible electronics that use plastic or metal foil electrodes. However, plastics have poor adhesion and metal foils make the devices bulky. A promising alternative is paper, which is flexible, porous, light, and thin. However, existing paper-based supercapacitors use multiple stacked sheets for storing energy, which causes mechanical issues. Now, researchers have fabricated multi-layer electrodes vertically integrated within a single sheet of paper. The resulting supercapacitor exhibits excellent energy storage.

 

Title: Vertical integration of multiple gold electrodes inside a single sheet of paper.

 

Caption: Researchers from Chung-Ang University, Korea have fabricated a flexible paper-based high energy storage device that can be used in both parallel and serial single supercapacitor (SC) configurations without modifying external wires and circuits. The equivalent circuits and corresponding electrochemical performance data are shown on the bottom right.

 

Credit: Dr. Inho Nam and Prof. Suk Tai Chang from Chung-Ang University, Korea

License type: Original Content

Usage restrictions: Cannot be reused without permission

 

Wearable devices such as smartwatches, fitness trackers, and virtual reality headsets are becoming commonplace. They are powered by flexible electronics that consist of electrodes with plastic or metal foil as substrates. However, both of these come with their own drawbacks. Plastics suffer from poor adhesion and low durability, while metal foils make the devices bulky and less flexible. In light of this, paper is a promising alternative. It is porous, light, thin, foldable, and flexible. Moreover, paper has randomly distributed fibers that provide a large surface area for depositing active electrode material, making for excellent electrochemical properties.

 

Accordingly, researchers have developed various paper-based supercapacitors, devices that store electric charge and energy, by stacking multiple sheets, acting as positive and negative electrodes and separators. However, such an arrangement increases device size and resistance. In addition, they tend to form creases, peel off, and slip over each other, which further deteriorate device performance.

 

To address these issues, a group of researchers from Chung-Ang University, led by Professor Suk Tai Chang and Associate Professor Inho Nam, recently fabricated a structure comprising multi-layer electrodes vertically integrated within a single sheet of paper. The novel design overcomes the problems associated with stacked sheets while retaining the inherent advantages of a paper-based substrate. Their work was made available online on 2 November 2022 and published in Volume 454, Part 2 of the Chemical Engineering Journal on 15 February 2023.

 

Dr. Nam briefly describes the fabrication process: “First, a water-repellent paraffin wax layer was printed and heated on both sides of a filter paper. This formed a water-friendly channel surrounded by a wax barrier within the paper. Following this, the paper was successively dipped in gold nanoparticle and gold enhancement solutions, which penetrated the channel via capillary action, resulting in a gold electrode in the middle of the paper. Similar electrodes were then fabricated on top and bottom surfaces of the paper to obtain a multi-layer electrode platform.”

 

The researchers completed the supercapacitor design by depositing manganese dioxide – an active electrode material – on the gold-paper electrode, which was then immersed in a polyvinyl alcohol–sodium sulfate gel electrolyte solution. After the gel had solidified, they characterized the manganese dioxide-gold-paper electrodes using various electrochemical measurement techniques, such as cyclic voltammetry, galvanostatic charge and discharge, and electrochemical impedance spectroscopy.

 

To their delight, the supercapacitor design showed a low electrical resistance, high foldability, and good mechanical strength. Manganese dioxide enhanced its active surface area, which further boosted the electrochemical performance. Additionally, the supercapacitor demonstrated high energy storage with maximum areal energy and power densities of 13.73 μW-hr-cm-2 and 1.6 mW-cm-2, respectively. Moreover, it retained its storage capacity even after undergoing 6000 charge-discharge cycles.

 

In effect, the multi-layer electrode supercapacitor platform is a super-dense energy storage device that utilizes the two-dimensional paper surface as a three-dimensional scaffold. Further, it can be used in parallel as well as serial integrated circuit configurations without modifying external wires and circuits. “Our proposed platform circumvents most fabrication challenges related to two-dimensional energy storage sheets. We believe that the findings of our study will guide the future fabrication of paper-based electronics with more multi-layered electrodes,” says Prof. Chang.

 

Indeed, the technology puts a whole new spin to the phrase “successful on paper”!

 

 

 

Reference

 

Authors

 

 

Title of original paper

 

 

 

Journal

 

Yeon Woo Kim1, In Hyeok Oh1, Seyoung Choi1, Inho Nam1,2,3, Suk Tai Chang1

 

Vertical integration of multi-electrodes inside a single sheet of paper and the control of the equivalent circuit for high-density flexible supercapacitors

 

Chemical Engineering Journal

 

 

DOI

 

Affiliations

10.1016/j.cej.2022.140117

 

1School of Chemical Engineering and Materials Science, Chung-Ang University

2Department of Intelligent Energy Industry, Chung-Ang University

3Department of Advanced Materials Engineering, Chung-Ang University

 

Media Contact

Inho Nam : inhonam@cau.ac.kr

Suk Tai Chang : stchang@cau.ac.kr

 

Your Press Release Source

Chung-Ang University

 

About Chung-Ang University

 

Chung-Ang University is a private comprehensive research university located in Seoul, South Korea. It was started as a kindergarten in 1916 and attained university status in 1953. It is fully accredited by the Ministry of Education of Korea. Chung-Ang University conducts research activities under the slogan of “Justice and Truth.” Its new vision for completing 100 years is “The Global Creative Leader.” Chung-Ang University offers undergraduate, postgraduate, and doctoral programs, which encompass a law school, management program, and medical school; it has 16 undergraduate and graduate schools each. Chung-Ang University’s culture and arts programs are considered the best in Korea.

 

Website: https://neweng.cau.ac.kr/index.do

 

 

About Professor Inho Nam

Inho Nam is an associate professor at the School of Chemical Engineering and Materials Science at Chung-Ang University in Korea since March 2019. He received a B.S. degree in Chemical Engineering from Yonsei University, Korea in 2010 and a Ph.D. degree from the School of Chemical and Biological Engineering at Seoul National University, Korea in 2016. Following a Postdoctoral Fellowship at Stanford University in USA, he worked as a faculty member at Seoul Women’s University from 2018 to 2019. His current research revolves around the experimental and computational design of nanomaterials for energy storage and conversion.

CAU Scholar's Space: https://scholarworks.bwise.kr/cau/researcher-profile?ep=1007

About Professor Suk Tai Chang

Suk Tai Chang is a professor at the School of Chemical Engineering and Materials Science at Chung-Ang University, Korea. He received his Ph.D. degree in Chemical and Biomolecular Engineering from North Carolina State University, USA, whereupon he worked as a Postdoctoral Fellow at Sandia National Laboratories, USA. His research interests include thin film deposition and micropatterning, microfluidic synthesis of microfibers and microcapsules, and wearable physical sensors. His research group is currently developing paper-based energy storage devices and foldable energy harvesting systems.

CAU Scholar's Space: https://scholarworks.bwise.kr/cau/researcher-profile?ep=759